Every Service, In Detail
What We Clean & How We Do It
The right method for every surface — soft wash where it matters, high pressure where it counts. Serving Auburn, Kent, Renton, Covington, Federal Way, and Maple Valley, WA.
Soft Wash Only
Roof Moss Treatment
Roof moss treatment is our specialty, and it's the one service where method matters most. We treat roofs with soft wash only — never pressure washing. High pressure and scraping tear at shingles, strip away the protective granules, void manufacturer warranties, and can even lead to denied insurance claims down the road. Instead, we apply a professional-grade soft wash solution that kills moss, algae, and lichen at the root. Within 24 to 72 hours the moss changes color — turning white, yellow, or brown as it dies — and over the following two to six weeks the dead growth sheds naturally with rain and weather. Heavily shaded or badly infested roofs can take longer, and a follow-up treatment is available if needed. Because we kill the growth at the root rather than just knocking it loose, results keep improving over time and stay gone far longer than a quick surface blast ever could. This protects your shingles, keeps your warranty intact, and safeguards your insurance coverage. It's the safe, effective, long-lasting way to reclaim your roof. We provide roof moss treatment for homes across Auburn, Kent, Renton, Covington, Federal Way, and Maple Valley, WA.
- How long does it take?
- The treatment itself is a single visit, usually a couple of hours depending on roof size and pitch. The visible results roll out over time — moss discolors within 24–72 hours and the dead growth sheds over the next 2–6 weeks with normal rain and weather.
- How much does it cost?
- Roof moss treatment is priced by consultation only. Roof size, pitch, and how heavily the moss has taken hold all affect the work involved, so we give you an accurate, no-obligation quote after reviewing your property. Photos help us respond faster.
- Soft wash or pressure wash?
- Soft wash — always, and pressure wash never. A roof is the one surface we will not put high pressure on. Pressure washing shingles causes damage, voids warranties, and risks insurance claims. Soft wash is the only safe, effective, lasting method for a roof.
Soft Wash
House Exterior Wash
Your home's siding takes a beating from Pacific Northwest weather — dirt, algae, mold, mildew, and oxidation build up on shaded and north-facing walls especially. Our house exterior wash uses a gentle soft wash approach that cleans siding, eaves, fascia, and trim without forcing water behind the panels or stripping paint. Soft washing is safe for vinyl, wood, painted surfaces, and stucco because it relies on professional-grade cleaning solutions rather than brute force to break down and remove organic growth at the source. The result is a home that looks freshly painted — brighter, cleaner, and free of the green and black staining that makes a house look older and more neglected than it really is. Because we kill mold and algae at the root instead of just rinsing the surface, the clean lasts longer and the growth is slower to return. Regular house washing also protects your siding investment, preventing the long-term staining and material breakdown that neglected exteriors suffer. Whether you have a single-story rambler or a large two-story home, we clean it thoroughly and safely, top to bottom. We wash home exteriors across Auburn, Kent, Renton, Covington, Federal Way, and Maple Valley, WA.
- How long does it take?
- Most single-story and two-story homes are completed in a single visit, often two to four hours depending on square footage, height, and how much buildup has accumulated on the siding.
- How much does it cost?
- House washing is quoted by consultation only. Because pricing depends on the size of your home, the number of stories, and the amount of buildup, we provide an accurate, no-obligation quote after learning about your property.
- Soft wash or pressure wash?
- Soft wash. Siding should never be blasted with high pressure — it can force water behind panels, crack seals, and strip paint. Soft washing cleans just as deeply while keeping vinyl, wood, stucco, and painted surfaces completely safe.
Pressure Wash
Driveway & Concrete Cleaning
Driveways, walkways, and patios are the surfaces where controlled high pressure truly shines. Concrete collects oil stains, tire marks, moss, algae, mildew, and years of ground-in grime that soft washing alone can't lift. We pressure wash these hard surfaces using the exact PSI the material calls for — strong enough to strip away buildup and reveal clean, even concrete, but controlled so we never etch or damage the surface. This matters more than most people realize: excessive high pressure creates micro-cracks in concrete and pavement, and those tiny fissures give mold and algae the perfect place to root and grow back even faster. Using the right pressure for the surface every time means your concrete not only looks better now but stays cleaner longer. We use surface cleaners for wide, even results across large flat areas and switch to targeted pressure for edges, stubborn stains, and detail work. The transformation on a stained driveway is often dramatic — years of discoloration gone in a single visit, with a crisp, uniform finish left behind. We clean driveways, walkways, patios, and concrete surfaces across Auburn, Kent, Renton, Covington, Federal Way, and Maple Valley, WA.
- How long does it take?
- Most driveways and concrete areas are finished in a single visit, typically one to three hours depending on square footage, the level of staining, and the overall surface condition.
- How much does it cost?
- Driveway and concrete cleaning is priced by consultation only. Square footage, the level of staining, and surface condition all factor in, so we provide an accurate, no-obligation quote after reviewing the area — photos help.
- Soft wash or pressure wash?
- Pressure wash — this is one of the few surfaces built for it. The key is the right PSI: enough to lift oil, moss, and grime, but never so much that it etches the concrete or creates micro-cracks where algae can take hold and regrow.
Soft Wash
Fence Cleaning & Restoration
Fences weather faster than almost anything else on your property. Constant sun, rain, and shade leave wood and vinyl fences covered in mold, algae, and a dull grey oxidation that makes them look tired and aged well before their time. Our fence cleaning and restoration uses a soft wash approach that removes that buildup and brings back the natural color of the wood without damaging the grain. Rather than blasting the surface — which can splinter wood, gouge soft grain, and drive water deep into the material — we use professional-grade cleaning solutions that break down organic growth and weathering gently and thoroughly. The difference on a grey, mildew-streaked cedar fence is striking: the warm natural tones return and the fence looks years younger. Soft washing is equally effective on vinyl fencing, lifting green algae and dirt without scratching or dulling the finish. Beyond appearance, keeping mold and algae off your fence slows the material breakdown that shortens a fence's lifespan, protecting the investment you've made in your property line. It's a simple service that makes a dramatic difference. We restore wood and vinyl fences across Auburn, Kent, Renton, Covington, Federal Way, and Maple Valley, WA.
- How long does it take?
- Most residential fence lines are completed in a single visit — commonly one to three hours depending on total length, height, and how much weathering and mildew have set in.
- How much does it cost?
- Fence cleaning is quoted by consultation only. Total length, material, and the degree of weathering all affect the work, so we give you an accurate, no-obligation quote after seeing the fence — photos speed things up.
- Soft wash or pressure wash?
- Soft wash. High pressure splinters wood, gouges soft grain, and can dull vinyl. Soft washing restores natural color and lifts algae safely, cleaning deeply without harming the surface of the fence.
Soft Wash
Deck & Patio Cleaning
Decks and patios are where you actually live outdoors, and they collect mold, algae, dirt, and stains that make them slippery and uninviting. Our deck and patio cleaning uses a soft wash approach that safely restores wood decks, composite decking, and patio surfaces without damaging the finish or the material. Wood decks are especially vulnerable to high pressure, which raises the grain, splinters boards, and strips sealant — so we clean them with professional-grade solutions and gentle technique that lift organic growth and stains while protecting the wood underneath. Composite decking, though tougher, still benefits from soft washing, which removes the mold and algae that settle into its textured surface without any risk of dulling or scratching. The result is a deck that's not only cleaner and brighter but genuinely safer underfoot, since we remove the slippery algae film that builds up in shaded, damp areas. Cleaning your deck also prepares it properly if you plan to reseal or stain it, giving any new finish a clean surface to bond to. It's the easiest way to get your outdoor space ready for the season. We clean wood decks, composite decks, and patios across Auburn, Kent, Renton, Covington, Federal Way, and Maple Valley, WA.
- How long does it take?
- Most decks and patios are done in a single visit, generally one to three hours depending on the size of the space, the material, and how much buildup is present.
- How much does it cost?
- Deck and patio cleaning is priced by consultation only. Size, material, and condition determine the work involved, so we provide an accurate, no-obligation quote after reviewing your space.
- Soft wash or pressure wash?
- Soft wash. Wood decking in particular should never be pressure washed — it raises the grain and splinters boards. Soft washing safely cleans wood, composite, and patio surfaces while protecting the finish.
Soft Wash
Stone Wall & Paver Cleaning
Stone, brick, and pavers are porous, textured, and endlessly hospitable to moss, algae, and organic growth — especially in the shaded, damp corners of a property. Our stone wall and paver cleaning uses a soft wash approach that removes moss, algae, dirt, and organic buildup from stone walls, pavers, brick, and retaining walls without damaging the surface or blowing out the joints. This is where soft washing really proves its worth: high pressure can strip the sand from paver joints, pit soft stone, and erode mortar, creating expensive problems down the line. Instead, we apply professional-grade cleaning solutions that kill moss and algae at the root and lift organic staining from deep in the texture of the stone. The result is restored, even color across walls and walkways and a surface that resists regrowth far longer than a quick blast would allow. Because we treat the growth at the root, moss and algae are slower to return, keeping your hardscaping looking sharp with less frequent cleaning. Clean, moss-free stone and pavers also mean safer, less slippery walkways and patios. We clean stone walls, pavers, brick, and retaining walls across Auburn, Kent, Renton, Covington, Federal Way, and Maple Valley, WA.
- How long does it take?
- Most stone and paver areas are completed in a single visit, typically one to three hours depending on the size of the area and how deeply the moss and algae have set in.
- How much does it cost?
- Stone wall and paver cleaning is quoted by consultation only. The size of the area and the degree of organic buildup determine the work, so we give an accurate, no-obligation quote after reviewing it.
- Soft wash or pressure wash?
- Soft wash. High pressure strips sand from paver joints, pits soft stone, and erodes mortar. Soft washing removes moss and algae at the root while keeping stone, brick, and pavers fully intact.
Manual + Flush
Gutter Cleaning & Debris Removal
Clogged gutters are one of the most common — and most damaging — problems a home faces, and they're easy to ignore until water is spilling over the edge or pooling against your foundation. Our gutter cleaning and debris removal service clears out the leaves, needles, twigs, and built-up debris that block your gutters, then flushes the downspouts to make sure water is flowing freely all the way to the ground. This is hands-on maintenance work rather than a wash: we manually remove blockages so nothing is simply pushed further down the line to clog again, then run water through the system to confirm every downspout is clear. Keeping gutters clean protects far more than the gutters themselves. Overflowing water damages fascia and soffits, seeps into basements and crawl spaces, erodes landscaping, and can undermine your foundation over time. In the Pacific Northwest, where wet weather and heavy tree cover are the norm, regular gutter maintenance is essential to keeping water moving away from your home the way it should. Staying ahead of it saves you from far more expensive repairs later. We clear and flush gutters on homes across Auburn, Kent, Renton, Covington, Federal Way, and Maple Valley, WA.
- How long does it take?
- Most homes are completed in a single visit, commonly one to two hours depending on the size of the home, the number of stories, and how much debris has accumulated in the gutters.
- How much does it cost?
- Gutter cleaning is priced by consultation only. The size and height of your home and the amount of debris determine the work involved, so we provide an accurate, no-obligation quote after learning about your property.
- Soft wash or pressure wash?
- Neither — this is manual work, not a wash. We physically remove debris by hand and then flush the downspouts with water to confirm they're flowing freely, rather than blasting the system with pressure.
Soft Wash + Right Pressure
Full Property Package
The Full Property Package is our most complete service and our best value — a coordinated exterior cleaning that handles your whole property in a single visit using the correct method for every surface. It brings together a soft wash house exterior, driveway and concrete pressure washing, side yards and walkways, fences, and more, so every part of your property is cleaned the right way without you having to book multiple appointments. This is where our "soft wash where it matters, high pressure where it counts" approach comes together: siding, fences, and delicate surfaces get a gentle soft wash, while driveways and concrete get controlled high pressure at the proper PSI. We arrive with commercial-grade equipment — professional pumps and reels — that lets us move efficiently from one surface to the next and complete a full property in a single, well-organized visit. The transformation when a whole property is done at once is dramatic, and neighbors notice. Bundling everything together is also the most cost-effective way to clean your entire exterior, since we're already on site with the right gear for every surface. We deliver full property cleaning across Auburn, Kent, Renton, Covington, Federal Way, and Maple Valley, WA.
- How long does it take?
- A full property is typically completed in a single visit of several hours — often around four to five hours depending on the size of the home and how many surfaces are included in the package.
- How much does it cost?
- The Full Property Package is priced by consultation only, and bundling everything together is the most cost-effective way to clean your entire exterior. We build an accurate, no-obligation quote around exactly which surfaces you want included.
- Soft wash or pressure wash?
- Both — that's the point. We soft wash siding, fences, and delicate surfaces, and use controlled high pressure on driveways and concrete, matching the right method to every surface in one coordinated visit.